2025Finished
Pertamina ITJ LPG Priok: transmitter replacement in areas PMB III and IV
A transmitter converts a physical quantity measured by a sensor into a standard signal that can be sent to a control system such as a PLC, DCS, SCADA, or indicator.
- Year
- 2025
- Location
- Jakarta Utara, DKI Jakarta
- Status
- Finished
- Work types
- Instrumentation
- Updated
Overview
This project installs and integrates a pressure monitoring system using pressure transmitters and a temperature monitoring system using temperature transmitters. The PLC processes the data and the HMI displays it. The work covers installation, calibration, wiring, configuration, testing, and commissioning until the system operates correctly.
Challenges
Limited work area.
Problems with wiring and device communication.
The work schedule had to fit field operations.
Solutions
Checking the wiring thoroughly.
Adjusting the PLC and transmitter configuration.
Coordinating with the related teams to set the work schedule.
Lessons learned
Good coordination makes the work go more smoothly.
Documenting the work results is important to make future maintenance easier.
From site
Field photos.
Priok LPG Terminal: Numerical display on a transmitter 
Priok LPG Terminal: Hand holding a cable near panel terminals 
Priok LPG Terminal: Worker handling a transmitter on a jetty
A similar need?
Tell us about your facility.
Name the equipment you run and what has to change. We reply with the questions we would ask on site.